PE tube extrusion


PE tube extrusion

  5-Layer Extrusion Line Model :
    It is producing 5-Layer sleeve, which is organized with PE, EVOH as gas barrier and adhesive material ADMER.

The best condition & power Gear box and motors for 4 screws are giving high speed, high efficiency and high quality movement.

To get the best quality of sleeves, we prepared a special vacuum cooling process which is organized vacuum calibration tooling zone,  annealing zone and finally water spray cooling zone. It will give a reasonable production speed, shine surface of sleeve and constant quality. It passed CE approval
    • Extruder ø 60mm l For Inner Layer(PE)
• Extruder ø 40mm l For Tie Layer(ADMER)
• Extruder ø 35mm l For Barrier Layer(EVOH)
• Extruder ø 60mm l For Outer Layer(PE)
• Tube dia l 16~60mm
• Tube length l 50~220mm
• Extrusion speed l Max. 23m/min
• Cutting capa. l Max. 200pcs/min
• Elec. power l 380V-3ph-50/60Hz, 115kw
• Water Chiller l 120ℓ/min, 25,000 k/cal
• Dimension(mm) l W 4500 × L 7800 × H 2500
PE Tube extrusion line PE tube extrusion line
diameter control unit Hual off Unit

cosmetic tube machine | PE tube machine| PE tube extrusion line | offset printing machine | tube capping machine | color offset printing machine | automatic capping machine | capping machine | top sealing machine | tube making machine | injection machine | heading machine
Office : 710 SAMSUNG TOWN , 11-34 Dsngsan-dong 5-ga Yeongdeoungpogu , Seoul Factory : 337, Seogu-ri , Gwangjeok=myeon, Yangjusi, Korea

Tel: 82-2-701-8205    Fax: 82-2-701-8207     E-mail:,